jcl:desks
This is an old revision of the document!
Height Adjustable Tables
If you have any issues with height adjustable tables, please try the following:
Reset the control unit to factory settings
To reset the control unit to factory settings, re-initialize the table.
- Unplug the table for 15 seconds. Plug in the table
- Press and hold the UP and DOWN buttons simultaneously for more than 3 seconds. — The legs will begin to move down at half speed of normal operation.
- Continue to press the UP and DOWN buttons. — The legs will move down to the lowest position, then rebound 1/16" to 3/16" (2mm to 5mm) and stop.
- Release the UP and DOWN buttons at the same time. This completes the initialization procedure.
/var/lib/dokuwiki/data/attic/jcl/desks.1535472683.txt.gz · Last modified: 2018/08/28 11:11 by kauffman