Printers have more features when you use the corresponding driver for the printer. This is helpful for the large Canon printers, as they have more finishing options available.

• Timber, Tree2, and Forest Driver
  • Canon imageForce C5160/C5170
  • Canon iR-ADV C3930 PS
• Basswood and Persimmon Driver
• Chinkapin Driver
• Willow Driver

1. Go to System Settings
2. Click Printers & Scanners
3. Select the printer you wish to check
4. You can see which driver you are using under "Driver version" at the bottom of the pop-up
   1. Apple's generic driver is a number with one decimal place (ex. 10.4)
   2. A printer-specific driver will have three octets (10.4.5)
5. If you are using an older driver or the printer has changed models, you will need to re-add the printer using the steps below

1. Add the printer using the steps under Adding a Printer and implement the following changes
2. Under “Use” select “Select Software”
3. Find correct printer driver and select

1. Timber, Forest, and Tree 2 have the ability to staple as a finish when using the correct driver
2. Set Staple Settings
   1. Select the printer in the Mac settings
   2. Go to “Options & Supplies” in printer
   3. Select the “Options” menu
   4. Pick “Staple Finisher” in “Output Options”
3. When Printing
   1. Scroll to Finishing
   2. Click the “i” icon
   3. Turn on Staple