Differences

This shows you the differences between two versions of the page.

--- jcl:hallwaymonitors [2019/02/19 16:36] – tdobes
+++ jcl:hallwaymonitors [2021/10/17 11:25] (current) – replace weird phrasing in introduction and update to reflect that HDMI cables are not currently sitting under TV's due to theft tdobes
@@ Line 1: / Line 1: @@
-====== Public Displays in Open Areas ======
+====== Large Displays in Common Areas ======
-Displays that are for public use. They have an HDMI cable connected to the wall plate below them.  These are available for anyone to use.
+In the Crerar 2nd and 3rd floor common areas, there are several large displays which can be used for group/collaborative projects or small presentations.  While these displays often show departmental announcements, there is also an HDMI port on the wall plate below them.  These are freely available for anyone in CS to use.
 The monitors have a native resolution of 1920x1080 (1080p).  There is a six-button control panel below the monitor for control purposes.
 ===== Instructions =====
-. Connect your laptop to the HDMI cable.
-. If the display is powered off, press the power button on the control panel.
-. Press the laptop button on the control panel.  You should see video from the laptop appear on the display a few seconds later.
-. If you need sound, you can adjust the volume of the monitor by pressing and holding the volume up and down buttons.
-...
-. When you are done, press the news button to switch back to the announcements feed or the power button to turn off the display.
-If the HDMI cable is missing or the display does not appear to be functioning properly, please contact Techstaff.
+  - Connect your laptop with an HDMI cable to the wall plate.
+  - If the display is powered off, press the power button on the control panel.
+  - Press the laptop button on the control panel.  You should see video from the laptop appear on the display a few seconds later.
+  - If you need sound, you can adjust the volume of the monitor by pressing and holding the volume up and down buttons.
+  - When you are done, press the news button to switch back to the announcements feed or the power button to turn off the display.
+If the display does not appear to be functioning properly, please [[techstaff@cs.uchicago.edu|contact Techstaff]].