Differences

This shows you the differences between two versions of the page.

--- jcl:hallwaymonitors [2018/11/15 11:37] – [Instructions] kauffman
+++ jcl:hallwaymonitors [2019/02/19 16:37] – tdobes
@@ Line 1: / Line 1: @@
 ====== Public Displays in Open Areas ======
-Displays that are for public use. They have an HDMI cord hooked up to them, which are for anyone to use and plug into.
+Displays that are for public use. They have an HDMI cable connected to the wall plate below them.  These are available for anyone to use.
+The monitors have a native resolution of 1920x1080 (1080p).  There is a six-button control panel below the monitor for control purposes.
 ===== Instructions =====
-Can be found in this [[https://howto.cs.uchicago.edu/_media/jcl:hallwaymonitorshdmi.pdf|PDF]].
+  - Connect your laptop to the HDMI cable.
+  - If the display is powered off, press the power button on the control panel.
+  - Press the laptop button on the control panel.  You should see video from the laptop appear on the display a few seconds later.
+  - If you need sound, you can adjust the volume of the monitor by pressing and holding the volume up and down buttons.
+  - When you are done, press the news button to switch back to the announcements feed or the power button to turn off the display.
+If the HDMI cable is missing or the display does not appear to be functioning properly, please contact Techstaff.