Manual

If you have any issues with height adjustable tables, please follow the directions below to reset the table back to its factory settings. Else, contact Nita Yack to request a repair.

To reset the control unit to factory settings, re-initialize the table.

1. Unplug the table for 15 seconds. Plug in the table
2. Press and hold the UP and DOWN buttons simultaneously for more than 3 seconds. — The legs will begin to move down at half speed of normal operation.
3. Continue to press the UP and DOWN buttons. — The legs will move down to the lowest position, then rebound 1/16" to 3/16" (2mm to 5mm) and stop.
4. Release the UP and DOWN buttons at the same time. This completes the initialization procedure.